You are not currently logged in.
Access JSTOR through your library or other institution:
If You Use a Screen ReaderThis content is available through Read Online (Free) program, which relies on page scans. Since scans are not currently available to screen readers, please contact JSTOR User Support for access. We'll provide a PDF copy for your screen reader.
Comparison of Free and Total Chlorine Measurement Methods in Municipal Wastewaters
James Derrigan, Li-Yin Lin and James N. Jensen
Water Environment Research
Vol. 65, No. 3 (May - Jun., 1993), pp. 205-212
Published by: Water Environment Federation
Stable URL: http://www.jstor.org/stable/25044289
Page Count: 8
You can always find the topics here!Topics: Chlorine, Wastewater, Titration, Electrodes, Chloramines, Disinfection, Triangles, Iodides, Modeling, Wastewater treatment
Were these topics helpful?See something inaccurate? Let us know!
Select the topics that are inaccurate.
Since scans are not currently available to screen readers, please contact JSTOR User Support for access. We'll provide a PDF copy for your screen reader.
Preview not available
Accurate and precise determination of chlorine residuals is essential for the assessment of disinfection efficiency. In this study, various methods for the analysis of free available chlorine (FAC) and total residual chlorine (TRC) were compared in chlorinated municipal wastewaters. Rates of interferences in the measurements also were determined. The amperometric titration and iodometric II methods were the most reproducible and the iodometric I and potentiometric electrode methods were the least reproducible for the measurement of TRC. The rate of interference in the measurement of FAC by the N,N-diethyl-p-phenylenediamine method was similar to the rate of interference from inorganic monochloramine. The interference rates in the measurement of TRC were in the range of calculated interference rates from organic dichloramines.
Water Environment Research © 1993 Water Environment Federation